Basic Info.
Classification
Lighting/Power
Standby UPS
Sine Wave Output UPS
Equipment Mode
Decentralized
Dimension
260mmx570mmx717mm
Output Waveform
Pure Sine Wave
Product Description
High Frequency 1-20kVA PF 0.9 Online UPS
Key features:
1. True online double conversion technology
2. Wide input voltage range
3. Zero transfer time
4. Protection against all types of power problems
5. No add-on CNTL unit required for parallel connection
6. Low initial investment and flexible for future expansion
7. Highest reliability and maximum performance for power sharing and redundancy
8. Equipped with maintenance bypass switch
The best charger is designed to recharge low battery as quickly as possible with out damaging batteries in 2 AMP up to 8 AMP and 240VDC. Allowing 90% recharge in as little as 10 hours after a total drain.
A). Audible and visual over-load indicator
The incorporated LED over load indicator prevents UPS overloads and premature failure of the UPS.
B). N+1 parallel redundancy
Allows a 6 kVA to grow up to 18kVA or 12kVA with 6kVA redundancy, allowing user to add capacity as needed and lower investment.
C). Simplified board separation
Dependent on the units all operation are separated into 5 PCBs allowing quick respond to damages and provides our valued dealers with simplified inventory and faster service to the end users.
D). Dynamic bypass
Automatic dynamic bypass and manual bypass provide a loop to repair UPS with out having to disconnect loads ideal for non stop computing for critical applications.
E). SNMP slot
Provides remote monitoring and control of UPS where a PC is not present or where this function is needed to be separated.
F)AS 400 dry contact card
Optional card to communicate in AS 400 protocols
G). Sine-wave output
True sine-wave output with a 3% THD on batteries. This feature provides dependable and compatible power for your most critical applications.
H). True double conversion technology with zero transfer time
This advance design provides the closest you can get to pure constant power in the industry.
Technical specification:
Model | H1KS | H2KS | H3KS |
Rated power | VA/W | 1KVA/0.7KW | 2KVA/1.4KW | 3KVA/2.1KW |
Input | Nominal voltage | 220VAC |
Voltage range | 115~300VAC |
Frequency range | 46~54Hz(default), user adjustable within 40~60Hz |
Power efficiency | 0.97 |
Connection | IEC320-10A inlet | IEC320-16A inlet |
Output | Voltage | 220VAC±2% |
Frequency | 46~54Hz or 50Hz±0.2(line mode) 50Hz±0.2Hz(battery mode) |
Waveform | Pure sine wave |
Distortion | 3% | 4% |
Overload capability | 108%~150% for 30 sec., 150% for 300ms |
Current crest ratio | 3:1 |
Connection | IEC320*4 | IEC320*6 | IEC320*3 and terminal block |
Battery | Type | Sealed, maintenance free, lead-acid |
Quantity | 3 pieces | 6 pieces | 8 pieces |
Back-up time(full load) | 5 min | 9 min | 5 min |
Recharge time | 5 hrs to 90% of capacity after full load discharge |
Bypass | Automatic transfer | On overload and UPS failure |
Before UPS power-on | Default "NO", user adjustable to "YES" |
Voltage range | 80~264VAC(default), user adjustable within 80~286VAC |
Transfer time | 0 ms; less than 4ms from inverter to bypass and vice versa |
LED indicators | Status | Load level/battery level, battery , utility power, inverter, bypass, overload, fault |
Audible alarm | Bypass, on battery mode, battery low, overload, fault |
Acoustic noise | At 1 meter distance | 45 dB | 50 dB |
Communication | DB-9 port | RS-232 serial interface |
Intelligent slot | Options: Webpower, AS400 card or Winpower CMC |
Network surge protection | RJ45 I/O port available for network or fax/modem |
Environmental | Operating temperature | 0~40°C |
Operating humidity | 20~90% non-condensing |
Weight | Net(Kg) | 13 | 31.5 | 32 |
Dimension | WxDxH(mm) | 145x400x220 | 192x460x348 |
Model | H1KL | H2KL | H3KL |
Rated power | VA/W | 1KVA/0.7KW | 2KVA/1.4KW | 3KVA/2.1KW |
Input | Nominal voltage | 220VAC |
Voltage range | 115~300VAC |
Frequency range | 46~54Hz(default), user adjustable within 40~60Hz |
Power factor | 0.97 |
Connection | IEC320-10A inlet | IEC320-16A inlet |
Output | Voltage | 220VAC±2% |
Frequency | 46~54Hz or 50Hz±0.2(line mode) 50Hz±0.2Hz(battery mode) |
Waveform | Pure sine wave |
Distortion | 3% | 4% |
Overload Capability | 108%~150% for 30 sec., 150% for 300ms |
Current crest ratio | 3:1 |
Connection | IEC320-10A*4 | IEC320-10A*6 | IEC320-10A*3 and terminal block |
Battery | Type | Sealed, maintenance free, lead-acid |
Nominal DC voltage | 36VDC | 96VDC | 96VDC |
Back-up time | Depends on the capacity of the external battery bank |
Connection | External battery socket |
Bypass | Automatic transfer | On overload and UPS failure |
Before UPS power-on | Default "NO", user adjustable to "YES" |
Voltage range | 80~264VAC(default), user adjustable within 80~ 286VAC |
Transfer time | 0 ms; less than 4 ms from inverter to bypass and vice versa |
LED indicators | Status | Load level/battery level, battery, utility power, inverter, bypass, overload, fault |
Audible alarm | Bypass, on battery mode, battery low, overload, fault |
Acoustic noise | At 1 meter distance | 45 dB | 50 dB |
Communication | DB-9 port | RS-232 serial interface |
Intelligent slot | Options: WebPower, AS400 card or WinPower CMC |
Network surge protection | RJ45 I/O port available for 10 base-T network or fax/modem |
Environmental | Operating temperature | 0~40°C |
Operating humidity | 20~90% non-condensing |
Weight | Net(Kg) | 7 | 13.5 | 14 |
Dimension | W x D x H(mm) | 145x400x220 | 192x460x348 |
Model | H6KS/H6KL | H10KS/H10KL |
Rated power | VA/W | 6KVA/4.2KW | 10KVA/7KW |
Input | Nominal voltage | 220VAC |
Voltage range | 176~276VAC |
Frequency range | 46~54Hz |
Power factor | 0.98 |
Connection | Hardwired |
Output | Voltage | 220VAC ± 1% |
Frequency | 50Hz ± 0.1%(battery mode) |
Waveform | Pure sine wave |
Power factor | 0.8 |
Voltage distortion | 2% under linear load |
Overload capability | 105%~130% for 10 min., ³ 130% for 1 min. |
Current crest ratio | 3:1 Max. |
Connection | Hardwired |
Battery | Type | Sealed, maintenance free, lead-acid |
Quantity | 20 pieces |
Back-up time(full load) | 7 min | 5 min |
Recharge time | 8 hrs to 90% of capacity after full load discharge |
Transfer time | 0ms |
Maintenance bypass switch | Yes |
LED indicators | Status | Load level/battery level, battery, utility power, inverter, bypass, overload, fault |
Audible alarm | Bypass | Alarm beeps every two minutes |
Battery discharge | Alarm beeps every four seconds, every second if battery low |
Overload | Alarm beeps two for every second |
Fault | Alarm beeps continuously |
Acoustic noise | At 1 meter distance | £ 55 dB |
Communication | DB-9 port | RS232 serial interface |
Intelligent slot | Options: WebPower, AS400 or WinPower CMC |
Parallel port | Up to three units in parallel for power redundancy and load sharing |
Environmental | Operating temperature | 0~40 ° C |
Operating humidity | 20%~90% non-condensing |
Weight | Net(Kg) | 35/84 | 38/93 |
Dimension | WxDxH(mm) | 260x570x717 |
Address:
Floor 1-4, B16, No. 1 Road, 1st Industrial Park, Baihuadong Village, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Pocasa Electronic Limited has been engaged in development, manufacturing and sales of highly reliable and cost-effective uninterruptible power supplies (UPS) including low frequency online UPS, high frequency online UPS and pure sine wave inverter and modified sine wave inverter for global customers.
Production Ability
Nowadays, POCASA manufactures 100, 000 PCS of power supplies each month including UPSs, power inverters, stabilizers/AVRs and battery chargers with power levels from 0.5kVA to 400kVA. POCASA optimizes Just in Time (JIT) resource planning and inventory control and supports our customers with minimized lead time and flexible delivery schedule.
Quality Assurance
POCASA′s facilities are ISO9001 certified. Our products are also recognized by CE, UL, TUV, CSA, FCC, etc. To assure quality and safety. POCASA′s modern facilities incorporate world-class manufacturing capabilities and technologies to produce high quality power supplies.
SMT Systems
Solder paste screen systems
In-circuit auto-test systems
Automated parts storage & retrieval systems
Wave solder systems
Burn-in racks
Automatic test systems
Our Advantages
POCASA will continue to excel towards providing perfect power management solutions. POCASA is confident to be your outstanding provider through:
1) The latest technologies
2) Real-time technology supports from a dedicated and well-trained engineer team
3) Rapid response to pre-sales and after-sales requests
4) A worldwide spread market network
POCASA takes pride in our expertise in offering high quality power supplies to all-purpose applications. You are invited to visit POCASA′s plants at any time to see how POCASA designs and manufactures. Also you are encouraged to contact POCASA to obtain professional technology assistance.